In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy 625 Artifact with Various Overhangs and Supports

Abstract

This document provides details on the experiment and associated measurement files available fordownload in the dataset “In Situ Thermography During Laser Powder Bed Fusion of a Nickel Superalloy 625 Artifact with Various Overhangs and Supports.” The measurements were acquired during the fabrication of a small nickel superalloy 625 (IN625) artifact using a commercial laser powder bed fusion (LPBF) system. The artifact consists of two half-arch features with increasing slopes for overhangs. These overhangs range from 5° from vertical to 85° from vertical in increments of 10°. The artifact geometry and process are controlled to ensure consistent processing along the overhang geometry. This control enables the effect of overhang geometry and support structures to be isolated from effects of inter-layer scan strategy variations. The measurements include high-speed thermography of each layer, from which radiance temperature, cooling rate, and melt pool length are calculated.