Abstract
In this study, in-situ synthesis of zinc oxide (ZnO) nanoparticles was utilized as an effective approach to prepare poly(vinyl alcohol) (PVA) and poly(vinyl alcohol)-graft-acrylonitrile/2-hydroxyethyl methacrylate (PVA-g-AN/HEMA) membranes with ZnO nanoparticles. The membranes were characterized by using Frourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), X-Ray diffraction (XRD) and contact angle measurements. Both of the membranes were utilized in separation of acetone/water mixtures via pervaporation technique and the optimum conditions regarding ZnO content within the membranes, acetone content in the feed solution and operating temperature were determined. PVA-g-AN/HEMA-ZnO nanocomposite membranes showed high permeation rate but low separation factor compared to PVA-ZnO nanocomposite membranes. Permeation rate and separation factor values were found to be in the range of 0.028–0.137 and 0.035–0.174 kg m−2 h−1, 17.61–325 and 9.4–84.5 depending on the pervaporation conditions for PVA-ZnO and PVA-g-AN/HEMA-ZnO nanocomposite membranes, respectively.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.