Abstract
Abstract The structural analysis of the CaO-ZrO2 solid-solutions was carried out using in-situ synchrotron radiation X-ray diffraction (SR-XRD). CaO-ZrO2 solid-solutions with 0, 2.5, and 5 at.% CaO contents were synthesized via a solid-solid ball milling technique. The amorphous ZrO2 powder was synthesized via co-precipitation using ZrCl4 and NH4OH as precursors, while the CaO powder was purified from a local limestone. In-situ SR-XRD measurements were conducted on the CaO-ZrO2 mixtures by independently heating them to 1100°C for different holding times of 0, 12, 24, and 36 minutes using a DHS furnace. Qualitative analysis of all SR-XRD patterns showed that only tetragonal zirconia (t-ZrO2) was present. The crystallite size of tetragonal zirconia ranged from 17 to 22 nm, depending on calcination holding time and CaO addition. Further analysis showed that the tetragonality (c/a) parameter remained relatively constant over the 36-minute holding time. However, the introduction of CaO led to an insignificant reduction in tetragonality, averaging 0.292%.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
