In Situ Microstructural Evolution in Fcc and Bcc Complex Concentrated Solid-Solution Alloys Under Heavy Ion Irradiation

Abstract

This study characterizes the microstructural evolution of single-phase complex concentrated solid-solution alloy (CSA) compositions under heavy ion irradiation with the goal of evaluating mechanisms for CSA radiation tolerance in advanced fission systems. Three such alloys, Cr18Fe27Mn27Ni28, Cr15Fe35Mn15Ni35, and equimolar NbTaTiV, along with reference materials (pure Ni and E90 for the CrFeMnNi family and pure V for NbTaTiV) were irradiated at 50 K and 773 K with 1 MeV Kr++ ions to various levels of dpa using in-situ TEM. Cryogenic irradiation resulted in small defect clusters and faulted dislocation loops as large as 12 nm in FCC CSAs. With thermal diffusion suppressed at cryogenic temperatures, defect densities were lower in all CSAs than in their less compositionally complex reference materials indicating that point defect accumulation is reduced during the displacement cascade stage. High temperature irradiation of the two FCC CSA resulted in the formation of interstitial dislocation loops which by 2 dpa grew to an average size of 27 nm in Cr18Fe27Mn27Ni28 and 10 nm in Cr15Fe35Mn15Ni35. This difference in loop growth kinetics was attributed to the difference in Mn-content due to its effect on the nucleation rate by increasing vacancy mobility or reducing the stacking-fault energy.