In Situ Generatable and Recyclable Oxygen Vacancy-Modified Fe2O3-Decorated WO3 Nanowires with Super Stability for ppb-Level H2S Sensing.

Abstract

Detecting hydrogen sulfide (H2S) odor gas in the environment at parts-per-billion-level concentrations is crucial. However, a significant challenge is the rapid deactivation caused by SO42- deposition. To address this issue, we developed a sensing material comprising Fe2O3-decorated WO3 nanowires (FWO) with strong interfacial interaction. During the H2S sensing process, important oxygen vacancies (OVs) are generated in situ and are recyclable on the surface of the Fe2O3 cluster. This sensor achieves a response of 140 (Ra/Rg) toward 50 ppm of H2S at 250 °C, with an experimentally measured detection limit of 1 ppb. It also exhibits remarkable stability, with no significant change observed over a long period of 150 days. Based on a combination of in situ DRIFT and DFT calculations, we have identified that the overactivation of O2 is the key step in the formation of SO42-. This overactivation can be partially modulated by the synergistic effect of Fe2O3 decoration and the in situ generated OVs, regulating the oxidation product to SO2 rather than the toxic SO42-. Furthermore, the continuous generation of OVs compensates for the loss of active sites pertaining to SO42- deposition, thereby contributing to the excellent stability of the sensor. This study underscores the beneficial impact of in situ OV generation in FWO for H2S sensing, offering a dynamic strategy to enhance sensor performance, particularly in terms of stability.