Abstract
Heavy oil is an important unconventional petroleum resource due to its abundant reserve, but the reduction of viscosity is a prerequisite for its effective exploitation. Researchers are trying to develop heavy oil catalytic aquathermolysis technologies for their merit of irreversible viscosity reduction through in-situ upgrading. The key point of catalytic aquathermolysis is the in-situ formation of high active catalytic phase. In this study, we have demonstrated that the precursor (NH4)2MoS4 was fully decomposed into MoS2 nanoparticles at relatively low temperature of 200°C after 90 minutes. The decomposition of (NH4)2MoS4 in aquathermolysis was significantly different from its decomposition process under hydrogen and vacuum atmospheres. The laboratory experimental results showed that the heavy oil viscosity reduction rate was above 85 % with the action of in- situ formed MoS2 nanoparticles after aquathermolysis. The sulfur content of heavy oil and asphaltene, asphaltenes and aromatics contents of heavy oil were decreased significantly, indicating that the cracking and ring opening reactions did take place. In the oilfield experiment, the precursor (NH4)2MoS4 was injected into the reservoir along with steam. After one-time injection, the catalytic effect could be sustained for at least four months. The maximum viscosity reduction rate was as high as 90 % during the first week, and still around 70 % in the 4th month. The molecular structural analysis of the produced heavy oil proved that the asphaltenes has been effectively cracked during the in-situ catalytic aquathermolysis. Both the laboratory and oilfield experimental results demonstrated that (NH4)2MoS4 precursor could form MoS2 nanoparticle and effectively catalyze the upgrading reactions of heavy oil. We hope that this study will provide a new catalyst development strategy for the catalytic aquathermolysis exploitation technology of heavy oil.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
More From: Colloids and Surfaces A: Physicochemical and Engineering Aspects
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.