Abstract
To improve the chlorine resistance of the polyamide-based NF membranes, ferric ion and tannic (FeIII-TA) networks were grafted onto the polyamide membrane surface via an in-situ modification strategy. The separation performance tests by a cross-flow NF system showed that the grafted membrane (TFC-n) possesses an obviously improved rejection for the selected salts, dyes, and micropollutants with only ~10.0% decrease in water permeability. The chlorination experiments under various pH values demonstrated that the TFC-n membrane presents much superior chlorine resistance than that of the control membrane. Importantly, the grafting layer was also applied to a commercial NF 270 membrane, and the FeIII-TA grafted NF 270 membrane exhibited much higher chlorine resistance than that of the bare NF 270 and polyvinyl alcohol (PVA) coated NF 270 membranes. The greatly enhanced chlorine resistance can be ascribed to the combined effects of enhanced size exclusion, additional protection, and sufficient radical scavenging originated from the grafted FeIII-TA networks. The high-performance of the grafted membrane highlight the feasibility of FeIII-TA networks as a promising material for the construction of chlorine resistant interfaces for environmental nanocomposites.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
