Abstract
The use of clays as effective arsenic sorbents has been strongly limited due to their low pH ZPC and cation active behaviour in aqueous systems at pH > 3.5. A simple Fe/Al/Mn pre-treatment can significantly improve their sorption affinity to oxyanions, including arsenites and arsenates. The dynamics of arsenic adsorption from groundwater is also controlled by dissolved Fe/Mn ions, which behave as promoters of As adsorption, or competitors to adsorption sites. Low grade calcinated kaolin (MT) and bentonite (BT) were used as clay sorbents. Arsenic adsorption on raw clays without presence of Fe/Mn ions is very slow and limited. During co-adsorption the Fe/Mn ions and As oxyanions were adsorbed together onto a sorbent surface. Both Mn and Fe particles demonstrated a good sorption affinity to the clay surface, but only Fe particles supported As adsorption considerably (80% of As were removed in Fe/As system, while < 30% only in the Mn/As system). The kinetics of co-adsorption compared to the use of Fe/Mn pre-modified sorbents indicated a more dynamic process, while all mechanisms corresponded to the first order run (k ≈ 9.10 − 6 – 1.10 − 4 s − 1 ). Arsenic was strongly stabilized in pre-modified sorbents.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
