An enhanced electrokinetic system for remediation of Cu-polluted clay soils by integrating purging solutions and intermittent power

Abstract

This study investigated the effectiveness and underlying mechanisms of purging solutions enhanced by intermittent power in improving electrokinetic (EK) restoration of clay soils even under high levels of heavy metals (HM). In so doing, the artificially contaminated specimens containing a wide range of copper (Cu) were prepared and then subjected to a series of EK tests with various electrolytes and electric regimes. Macro and micro scale examinations revealed that under the unenhanced EK condition (i.e., continuous current without agents), the formation of non-conducting solid phases and/or the clogged fabric in the samples with the high dosages (> 250 mg/kg) of HM could dramatically impede the metal separation from the soil. Hence, increasing the remediation time would not be very effective in facilitating the decontamination process. It was observed that the EDTA-ameliorated treatment accompanied by pentetic acid and acetic acid can mitigate the metal precipitation/encapsulation effects induced by EK actions, resulting in improved rate of HM removal. In this case; however, a high portion of these enhancers would be required to ensure the stable mobility of ions and to achieve successful recovery. Such a limitation has been shown to be overcome by incorporating pulsed power (PP) at an optimal frequency. In fact, as evidenced by SEM-EDX and XRD analyses, the integration of chemical agents with PP could simultaneously retain the solubilized Cu species in the soil mass and modify the matrix tortuosity (i.e., the establishment of well-linked pores), two features that have been found to play essential roles in providing for favorable activity of HM ions during the EK operation. The corresponding refinements in the binary system would cause an almost 8 folds increase in the removal efficiency and a shorter (up to 30 %) time of treatment compared to conventional EK.