Improving the Performance of Structural Members by Incorporating Incinerated Bio-Medical Waste Ash in Reinforced Geopolymer Concrete

Abstract

This study aims to analyze the use of Incinerated Bio-Medical Waste Ash (IBWA) in reinforced concrete structural member with ground granulated blast furnace slag (GGBS) as an alternate building ingredient instead of cement. Biomedical waste was produced from various medical resources such as hospitals, medical institutes and research centres. GGBS is the waste generated from the steel plant. The climate is now being affected by the release of CO2 (global warming) from the Portland cement industries. Therefore, greater attention must be paid to study efforts to use geopolymer concrete. Geopolymer is a novel inorganic eco-friendly binding agent derived from an alkaline solution that stimulates aluminosilicate source material (GGBS, Rice Husk Ash, Quartz Powder, metakaolin, fly ash and Silica Fume). In this research, laboratory tests for Reinforced Geopolymer Concrete (RGPC) beams (deflection, ductility factor, flexural strength and toughness index) and columns (load-carrying ability, stress-strain behaviour and load-deflection behaviour) were conducted for three types of proportions using [30% IBWA – 70% GGBS Geopolymer concrete, GGBS Geopolymer concrete and Reinforced Cement Concrete. The experimental findings revealed that the performance of reinforced 30% IBWA – 70% GGBS geo-polymer beams and columns worked more effectively than reinforced cement concrete beams and columns.