Abstract
The durability of epoxy-concrete interface is a crucial factor for practical application of externally bonded fiber-reinforced polymer (FRP) retrofit systems, particularly when the strengthened structure is subjected to severe environmental conditions. Given the demonstrated potential of nanoclays in enhancing engineering performance of polymers, this work assesses the beneficial effect of organic montmorillonite (OMMT) nano-modification of epoxy resin on the axial compressive properties of FRP-reinforced concrete under a 10 wt% sodium sulfate wet/dry (W/D) cycling environment. Three types of concrete samples were fabricated and tested: plain concrete cylinders, CFRP-reinforced concrete cylinders using unmodified vs. OMMT-modified epoxy resin as the adhesive, respectively. The optimal dosage of OMMT was determined to be 2 wt% through tensile and lap shear tests, as well as microscopic characterization of the fractured cross-section of the molded resin samples. This optimal dosage of OMMT allows the epoxy adhesive to achieve the highest values in the tensile strength (90.4 MPa), lap shear strength (80.0 MPa), Tg (280.5°C) and water contact angle (115.1°). In the fracture section of epoxy resin with a 2 wt% OMMT, multiple microcracks developed and the OMMT nanoplatelets were well dispersed in the epoxy matrix. The laboratory testing program explored various W/D cycle periods. The experimental results indicate that the OMMT-modified epoxy resin significantly improved the mechanical properties and deformation resistance, altered the failure mode, and effectively delayed the strength degradation of the protected concrete. After 150 W/D cycling days, the OMMT-modified CFRP-confined concrete samples maintained their ductility coefficient and axial compressive strength at 3.58 and 123.5 MPa, respectively, 12.6 % and 9.1 % better than the common CFRP-confined samples. Combining these results with the residual axial compressive strength ratio, we propose an improved design model for calculating the axial compressive strength of CFRP-retrofitted concrete structures in sulfate-laden environments. This study demonstrates the beneficial role of OMMT in enhancing the epoxy adhesive and provides insights into the reinforcement of concrete structures by externally bonded CFRP in sulfate-rich environments.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call