Improving the Mechanical Properties of Low‐Carbon Steel by In Situ Strain Aging

Abstract

A novel continuous process that utilizes the concept of strain aging not only in the automotive industry but also in structural materials as a whole is developed. The principle behind achieving in situ strain aging is as follows. 1) Dislocations are generated through compressive deformation during continuous pressing. 2) The processing conditions at the strain aging temperature create a favorable environment for the diffusion of interstitial atoms, leading to the formation of Cottrell atmospheres. The in situ strain aging‐processed low‐carbon steel demonstrates a significant increase in strength compared to the unprocessed sample (increased yield strength by ≈37.6 MPa), which can be attributed to the strain aging effect, as well as the combined effects of grain refinement and pre‐existing dislocations. Additionally, the generation of dislocations during compressive deformation suppresses void nucleation during pre‐strain, preventing a loss of elongation (reduced uniform elongation by ≈1.5%). The in situ strain aging‐processed low‐carbon steel exhibits a superior strength–elongation combination compared to both the unprocessed low‐carbon steel and strain aging‐simulated counterparts obtained through tensile deformation.