Improving the ablative performance of epoxy‐modified vinyl silicone rubber composites by incorporating different types of reinforcing fibers

Abstract

AbstractIn this study, ablative resistance of single fiber‐ and hybrid fiber‐reinforced epoxy‐modified vinyl silicone rubber (EMVSR) composites was systematically studied. Three types of fibers, namely aramid fiber (AF), basalt fiber (BF), and carbon fiber (CF), were employed as the reinforcements. The results indicated that the incorporation of fiber reinforcements effectively suppressed the expansion and strengthened the char layer. Besides, the quality of char layer was quite different when different types of fibers were used. The char layer of AF‐modified samples had more surface defects, BF‐modified samples were brittle, and CF‐filled samples were dense and flat. The use of hybrid AF/BF fibers improved the ablation and anti‐erosion performance of EMVSR. Meanwhile, the thermal insulation performance was enhanced because the back‐face temperature was the lowest with the addition of 1 phr AF and 5 phr CF. The above results indicated that the ablation and anti‐erosion resistance and the quality of char layer as well as the thermal insulation behavior of EMVSR were significantly improved by incorporating fibrillar fillers, which demonstrate practical applications as flexible anti‐ablation materials for thermal protection systems.Highlights Epoxy‐modified vinyl silicone rubber was used for preparing ablative composites. The effect of adding different fibers on the ablation properties was studied. The presence of single fibers improved the strength of char layer. The use of hybrid fibers was found effective in enhancing the ablative properties. The intrinsic property and entanglement of fibers affected the ablative properties.