Improving phase change heat transfer in an enclosure partially filled by uniform and anisotropic metal foam layers

Abstract

Anisotropic metal foams exhibit exceptional potential for improving the efficiency of latent heat thermal energy storage (LHTES) units by enhancing heat transfer and thermal energy storage rates. This study explores the largely uncharted area of thermal behavior of anisotropic metal foams in varied configurations and enclosure designs. The research focuses on an LHTES unit with a specific channel configuration, constructed using copper and containing three layers of copper metal foam, one of which is anisotropic and infused with paraffin wax. The finite element method was utilized to manage the complexities emerging from phase change, and the anisotropic angle varied from 0 to 90° in three different placements of the AMFL: top, middle, or bottom of the enclosure. The ideal design was achieved with an AMFL in the middle with a 0°angle, resulting in a 3.7 % reduction in melting time and approximately a 2.3 % reduction in solidification time. However, AMFL designs at the middle placement with a 75° anisotropic angle were less effective, hampering the melting and solidification processes, thus potentially extending charging and discharging times. The study concludes that the placement and angle of the AMFL layer are vital for the heat transfer capabilities of phase change materials. AMFL at the middle with a 0° angle optimally leverages temperature gradients, enhancing heat transfer compared to other investigated cases. An AMFL in the middle with a 0° angle exhibits approximately 7.1 % and 6.3 % improvements for melting fractions of 0.9 and 0.95, respectively, underscoring its potential for efficient thermal energy storage.