Improving Co(II) separation from Ni(II) by solvent extraction using phosphonium-based ionic liquids

Abstract

The solvent extraction of Co(II) from its aqueous solutions free of acids or chloride salts at high concentration by the ionic liquids trihexyl(tetradecyl)phosphonium bis(2,4,4-trimethylpentyl)phosphinate ([P66614][C272]) and trihexyl(tetradecyl)phosphonium thiocyanate ([P66614][SCN]) was characterised at saturation of the organic phase with Co(II) using toluene as diluent. The ionic liquids’ cation participated in the formation of two ion-pairs in the organic phase, i.e., one with the complex anion containing cobalt, and the other with the cobalt counter anion, thus preserving electroneutrality in both the organic and aqueous phases. This was considered to be an example of bifurcated extraction.UV–visible spectral studies of the intensively blue organic phase after Co(II) extraction demonstrated that the Co(II) coordination sphere geometry in the case of both extractants was tetrahedral. The Co(II) extraction stoichiometry was experimentally determined for the first time by saturating the organic phase with Co(II). The [P66614][C272] to Co(II) stoichiometric mole ratio in the extracted adduct was found to be 2.8:1, suggesting that eight phosphinate anions acted as bridging ligands around three cobalt centres. For the [P66614][SCN], the stoichiometric mole ratio was found to be 2.5:1 with the Co(II)-thiocyanate adduct consisting of two Co(II)-thiocyanate tetrahedra linked by a bridging thiocyanate ion.The Co(II) extraction was enhanced when the aqueous phase contained an anion with high lipophilicity (e.g., nitrate, thiocyanate). [P66614][SCN] did not extract Ni(II) from nitrate or chloride solutions, thus demonstrating its potential for the separation of Co(II) from Ni(II) without requiring the addition of high concentrations of acids or chloride salts to the aqueous phase.