Abstract

A compound parabolic concentrator (CPC) with a flat absorber is widely used in low-concentrating photovoltaic thermal (CPVT) systems. CPC certainly develops non-uniform heat flux distribution over the absorber surface which is significantly reduced by the integration of homogenizer referred as Elongated CPC (ECPC). The objective of the present work is to analyse the effect of homogenizer ratios, truncation ratios and concentration ratios on the heat flux distribution characteristics of a CPC collector. In this paper, a ray tracing simulation is carried out to obtain the heat flux distribution profiles and the same is incorporated within CFD software to obtain the temperature distribution profiles. As a result, it is observed that the optimum truncation ratio would be 0.7 at which uniformity in flux distribution is improved by 3%, with just 2% reduction of average heat flux value. Furthermore, with optimized homogenizer ratio of −0.35 at concentration ratio of 3, 64% improvement in uniformity of flux distribution has been noticed. From the study, it has been concluded that for different concentration ratios of 1.5, 2, 3, 4, 5, 6, 7 and 8, the optimum homogenizer ratio is observed to be −0.9, −0.55, −0.35, −0.25, −0.2, −0.15, −0.15 and −0.05 respectively.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call