Abstract
This paper used ultrasonic strengthening grinding (USGP) to process 254SMo welded joints. The mechanical properties of processed and unmachined samples of welded joints, including grain size, dislocation, microhardness, residual stress, and high-temperature oxidation resistance at 900 °C, were investigated. The results indicate that the grains of the processed samples exhibit significant refinement and a high dislocation density and that the maximum microhardness and residual compressive stress are 392.5 HV0.3 and −633.44 MPa, respectively. In addition, the processed sample exhibits excellent oxidation at high temperatures. At 900 °C, the mass gain of the USGP-processed sample is reduced by 47.5 % compared to its mass gain prior to processing. These results highlight the potential of this method in improving the high-temperature resistance of various mechanical components, particularly those made from special materials.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.