Abstract
The Body-Centered Cubic (BCC) lattice structure is commonly used in high-end equipment fields, such as aerospace, due to its superior mechanical properties, lightweight characteristics, and ease of processing. However, there is a need to improve the performance-to-weight ratio of the traditional BCC lattice structure. This study utilizes topology optimization to design a T-BCC lattice structure based on the BCC unit cell, with the aim of maximizing stiffness. A model proposing the characterization of the Young's modulus of BCC lattice structures is presented. The model is based on calculations of cell porosity and beam stress analysis, assuming a large cell. This approach indirectly enables the calculation of the Young's modulus of T-BCC lattice arrays in multiple dimensions. Simulation and experimental comparison were used to analyze the compressive performance and load-bearing modes of T-BCC lattice structures, revealing the mechanisms of compressive deformation and failure modes. The accuracy of the characterization model for Young's modulus was found to be 93.1%. Compared to BCC lattice structures designed by traditional methods, T-BCC lattice structures designed via topology optimization can increase the Young's modulus by up to 36% and yield strength by 37.2%. This suggests that T-BCC lattice structures are a more lightweight and efficient solution for designing components in high-end equipment fields.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Similar Papers
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.