Improvement of Oxygen Mobility with the Formation of Defects in the Crystal Structure of Red Mud as an Oxygen Carrier for Chemical Looping Combustion.

Abstract

Fe₂O₃ is the major component of red mud, which is a by-produced after eluting aluminum from bauxite in the Bayer process, and can be used as an oxygen carrier. On the other hand, red mud is unsuitable for using oxygen in the crystal lattice because of its low surface area. In this study the red-mud sample was sulfidated at high temperatures to improve the lattice oxygen mobility by forming lattice defects in the iron oxide crystals. To form crystal defects on red mud, iron oxide was converted to iron sulfide with hydrogen sulfide, and then re-oxidized by air to remove the sulfur components. In these processes, it was possible to generate defects could be generated in the crystal structure. Crystal defects are formed by the difference in the molar volume of oxygen and sulfur bound to the metal in the oxidation-sulfidation process. The surface area of the defective red mud increased from approximately 25.9 m₂/g to 122.1 m₂/g, and the pore volume increased from 0.1714cc/g to 0.2803 cc/g. In addition, the formation of crystal defects increased the oxygen transfer capacity of red mud from 1.75% to 2.25% at 15 vol.% hydrogen. This means that the amount of oxygen transported during the reduction process could be enhanced approximately 1.29 fold.