Abstract
The article discusses the issues of increasing the energy efficiency of processing agricultural waste in a gas generator. The main goal of this technological process is the production of gas fuel from agricultural waste. This fuel is generator gas. The energy value or calorific value of the generator gas depends on the elementary composition of the solid fuel being processed (straw, animal droppings, peat, wood, carbon-containing industrial waste, etc.) and also on the conditions under which chemical reactions take place in the gas generator. In order to improve the gas generator technology, some innovative technical solutions have been proposed. The solutions are related to controlling the supply of the oxidizer (atmospheric air) to the reaction zone of the gas generator, to recuperate the thermal energy of the gas generator and the combined combustion engine of the power plant for the needs of the gasification process. The solutions are also related to the use of compensation and accumulation systems for supplying the consumer with generator gas and to the spatial positioning of the gas generator housing. The control mode of the oxidizer supply to the reaction zone of the gas generator was also investigated. The analysis of the experimental material allows us to draw a conclusion about the positive effect of control modes on the energy value of the generator gas at non-nominal consumption of generator gas by the consumer. This is a consequence of the optimization of the flow speed of the oxidant from the blowing nozzles of the gas generator. According to the tests of the chemical composition of generator gas in gas generator, depending on the number of electromagnetic valves operating, the largest CO content (approx. 17%) was with five valves, CO2 (approx. 5%) with the lower number of valves, and the O2 was with the highest number of valves. The pressure gauge (discharge in gas generator) was the biggest, according to the lower number of valves. The biggest gas consumption was approx. 6 m3/h.
Highlights
IntroductionAgricultural waste processing for energy purposes is an absolute necessity for the contemporary production combined with the agri-processing economy
This article is an open access articleAgricultural waste processing for energy purposes is an absolute necessity for the contemporary production combined with the agri-processing economy
An alternative for the traditional natural fertilizer and agricultural waste biogas processing technology can be offered by gas generator technology
Summary
Agricultural waste processing for energy purposes is an absolute necessity for the contemporary production combined with the agri-processing economy. Applying “green technologies” in process production cycles and a production of waste recycling leads to a decrease in production costs and enhances a general environment-friendliness in the production plant location zone [1,2,3,4]. An alternative for the traditional natural fertilizer and agricultural waste biogas processing technology can be offered by gas generator technology. Its advantages can include low weight and size characteristics parameters, a high production waste processing speed, and a high adaptability to the input waste material to be processed. There are disadvantages: a limitation related to moisture and the size of the input material to be processed and a release of thermal energy as a byproduct of technological production process
Sign-in/Register to view highlights & summary Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
