Abstract
The method of thermal annealing was applied to 0.05PZN-0.15PNN-0.8PZT ceramics to improve its electrical properties. The ceramics were prepared via a columbite method: sintered at 1250°C for 2 h, followed by the thermal annealing at 900°C for 8–24 h. Improvements in many electrical properties such as dielectric and ferroelectric properties were observed. Annealing for 8 h was found to be the optimum annealing condition for the ceramics. The results were discussed in term of densification and composition variation after annealing.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.