Improved Performance of Air-Processed Perovskite Solar Cells via the Combination of Chlorine Precursors and Potassium Thiocyanate.

Abstract

Due to their low cost and high efficiency, hybrid perovskite solar cells (PSCs) have shown the most outstanding competitiveness among third-generation photovoltaic (PV) devices. However, several challenges remain unresolved, among which the limited stability is arguably the main. Chlorine (Cl) has been widely employed to yield PV performances, but the Cl-doping mechanism and its role in mixed-halide PSCs are not entirely understood. Here, we investigate the effect of Cl-doping using different precursors such as formamidinium chloride (FACl), cesium chloride (CsCl), and lead chloride (PbCl2), which lead to the incorporation of Cl at different sites of the perovskite crystal. We demonstrate that the stability and efficiency of air-processed PSCs are strongly affected by Cl bonding into the cationic chloride precursor. Furthermore, adding potassium thiocyanate (KSCN) leads to the maximum efficiency of 18.1%, improving the operational stability with only 18% PCE loss after 520 h, stored under ambient conditions. Incorporating CsCl and KSCN presents an effective approach to further boost the performance and thermal stability of PSCs by tailoring the composition of the perovskite's composition. Finally, we used the slot-die method to demonstrate that our strategy is scalable for large-area devices that have shown similar performance. Our results show that fully air-processed and stable PSCs with high efficiency for large production and commercialization are achievable.