Improved CFAR Detection and Direction Finding on Time–Frequency Plane With High-Frequency Radar

Abstract

In addition to sea state monitoring, high-frequency surface wave radar (HFSWR) has attracted more and more attention in ship detection and tracking. Constant false alarm rate (CFAR) detectors have been widely used to handle the complex properties of sea clutters. Due to the relatively high detection threshold, the performance of CFAR in detecting weak and nonstationary targets is often not good. To address this problem, time–frequency analysis (TFA) is involved in the ship detection and direction finding (DF) processing. First, the probability distribution model of sea clutter is achieved in the time–frequency (TF) domain. Corresponding to this sea clutter model, the decision thresholds of targets on the TF plane under different false alarm rates <inline-formula xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink"> <tex-math notation="LaTeX">$P_{\mathrm {fa}}$ </tex-math></inline-formula> are calculated. Next, the array snapshots are formed by the spectral samples along each extracted TF ridge and later used in the DF process to give the direction of arrival (DOA). Experimental results show that, with the automatic identification system (AIS) records as the ground truth, the number of matched targets detected by the proposed TF-CFAR method is 5%–8% greater than that by the cell averaging (CA)-CFAR method. Moreover, the TF multiple-signal classification (MUSIC) also outperforms MUSIC with an improvement of 3.52° in the root-mean-square error (RMSE) of the DOA estimates under a low signal-to-noise ratio (SNR). In conclusion, the involvement of TFA can greatly improve the detection and DF performances of compact HF radar, particularly under the situations of low SNR and target nonstationarity.