Improved carrier injection and balance in solution-processed blue phosphorescent organic light emitting diodes based on mixed host system and their transient electroluminescence

Abstract

Solution processed blue phosphorescent organic devices based on mixed host system were fabricated in this paper. A set of blue phosphorescent organic light emitting diodes (PhOLEDs) utilizing two small molecular materials of 3,3-Di(9H-carbazol-9-yl) biphenyl (mCBP) and 4,4′,4′′-tris(N-carbazolyl)-triphenylamine (TCTA) as mixed host doped with phosphor bis[(4,6-difluorophenyl)-pyridina-to-N,C2](picolinate) iridium(III) (FIrpic) are fabricated. The results show that the performance of mixed host system devices is improved compared with two single host devices. The max luminance of 23,340 cd/m2 is achieved in the mCBP:TCTA (2:1) mixed host device while the 14,400 cd/m2 in mCBP single host devices and the 12,968 cd/m2 in TCTA, and the current efficiency is improved from 8.17 cd/A(mCBP), 9.61 cd/A (TCTA) to 13.62 cd/A at the luminance of 1000 cd/m2. The transient electroluminescence measurement was utilized to detect the carrier injection between two kinds of PhOLEDs and penetrate how the trap charges works in the mixed host devices. This presents that the mixed host system contributes to the hole injection and the equilibrium of the carrier transport, reduces trapped charges, thus brings about high efficiency devices.