Abstract
The formation of nitrogen oxides from fuel-nitrogen through intermediates was studied by measuring first fuel-O fuel-N ratios and nitrogen functionality in selected solid fuels. Then the ratios of the yields (fuel-N → HCN) (fuel-N → NH 3) in a nearly inert atmosphere at 800°C in an entrained flow reactor was measured and finally the ratio (fuel-N → N 2O) (fuel-N → NO) in an oxidizing atmosphere at 800°C. The fuels studied were coal, brown coal, S- and C-type peat, fir bark, birch bark and pine bark, all milled to a particle size < 63 μm. The ratios of O N in the fuel, measured by elemental analysis, ranged from 7 to 150. Nitrogen functionality (mass percent of the total nitrogen content) was determined by XPS. The (fuel-N → NCN) (fuel-N → NH 3) conversion ratio in the absence of O 2, and also the (fuel-N → N 2O) (fuel-N → NO) conversion ratio with O 2 present, decreased with increasing ratio of fuel-O fuel-N , but neither ratio decreased regularly with the increasing ratio of pyrrolic to pyridinic nitrogen in the fuel. Thus, fuel-oxygen plays a more important role than nitrogen functionality in the chemistry of nitrogen oxide formation. The strong effect of (fuel-O fuel-N) ratio on the (fuel-N → HCN) (fuel-N → NH 3) ratio may be due to the reaction between OH radicals and HCN to form NH 3 near the fuel particle. The importance of this reaction is considered. Charring the fuel sample before combustion led to a sharp drop in the conversion of fuel-N to N 2O compared with the virgin fuels. Thus, heterogeneous combustion reactions produced much less N 2O than homogeneous combustion reactions.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.