Abstract
Monte Carlo N-Particle 6 (MCNP6) is the latest version of Los Alamos National Laboratory's powerful Monte Carlo software designed to compute general photon, neutron, and electron transport using stochastic algorithms. Here we provide a case study of modeling the photon beam of a Varian 600C Clinical Linear Accelerator (linac), which is used to deliver radiation therapy, along with a comparison to experimentally measured beam characteristics. The source definition parameters in MCNP6, including the energy spectrum and angular spectrum of the photons, secondary and tertiary collimators, and a water phantom that tallied dose delivered at different points along the phantom are included. The experimental data for comparison was in the form of a percent depth dose curve as well as crossline and inline beam profiles. Experimental depth dose curve and beam profiles were acquired using a standard 0.125 cc ion chamber within a water phantom. In the computational model, the simulated depth dose curve was computed by tallying the total energy deposited in a stack of vertical slices down the depth of the phantom for percent depth dose curves. The simulated beam profiles were computed in a similar fashion, by tallying the energy deposited in a horizontal row, both in the x- and y-directions of cubic cells located at various depths. For the percent depth dose curve, a mean absolute percentage difference of 1.02%, 1.07%, and 1.94% were calculated for field sizes of 5 × 5 cm2, 10 × 10 cm2 and 20 × 20 cm2, respectively, between the model and experimental measurements were calculated. We present our model as an example to guide other MCNP6 users in the medical physics community to create similar beam models for biomedical dose estimation and research calculations for predicting dose to newly developed phantoms.
Published Version
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call