Abstract

At present, there are no standardised tests to assess metal leaching during submarine tailings discharge. In this study the influence of variables known to affect metal mobility and availability (dissolved organic carbon (DOC), pH, salinity, temperature, aerated/anoxic conditions) along with variables affected by the discharge conditions (flocculant concentration, suspension) were studied in bench-scale experiments. The leaching tests were developed based on the case of a copper mine by Repparfjorden, northern Norway, which is planned to re-open in 2022. The experiments, which had three week duration, revealed low (<6%) leaching of metals. Multivariate analysis showed that all variables, apart from DOC, highly influenced leaching and partitioning of at least one metal (Ba, Cr, Cu, and/or Mn). The high quantity of the planned annual discharge of mine tailings to the fjord (1-2milliontonnes) warranted estimation of the leached quantity of metals. Multivariate models, using present-day conditions in the fjord, estimated leaching of up to 124kg Ba, 154kg Cu and 2400kg Mn per year during discharge of tailings. Future changes in the fjord conditions caused by climate change (decreased pH, increased temperature) was predicted by the multivariate models to increase the leaching up to 55%, by the year 2065. The bench-scale experiments demonstrated the importance of including relevant variables (such as pH, salinity, and temperature) for metal leaching and -partitioning in leaching tests. The results showed that metal leaching during discharge is expected and will increase in the future due to the changed conditions caused by the foreseen climate change, and thereby underline the importance of monitoring metal concentrations in water during operations to determine the fate of metals in the fjord.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.