Abstract

PurposeTo evaluate the effectiveness of surface image guidance (SG) for pre‐imaging setup of stereotactic body radiotherapy (SBRT) patients, and to investigate the impact of SG reference surface selection on this process.Methods and materials284 SBRT fractions (SG‐SBRT = 113, non‐SG‐SBRT = 171) were retrospectively evaluated. Differences between initial (pre‐imaging) and treatment couch positions were extracted from the record‐and‐verify system and compared for the two groups. Rotational setup discrepancies were also computed. The utility of orthogonal kVs in reducing CBCT shifts in the SG‐SBRT/non‐SG‐SBRT groups was also calculated. Additionally, the number of CBCTs acquired for setup was recorded and the average for each cohort was compared. These data served to evaluate the effectiveness of surface imaging in pre‐imaging patient positioning and its potential impact on the necessity of including orthogonal kVs for setup. Since reference surface selection can affect SG setup, daily surface reproducibility was estimated by comparing camera‐acquired surface references (VRT surface) at each fraction to the external surface of the planning CT (DICOM surface) and to the VRT surface from the previous fraction.ResultsThe reduction in all initial‐to‐treatment translation/rotation differences when using SG‐SBRT was statistically significant (Rank‐Sum test, α = 0.05). Orthogonal kV imaging kept CBCT shifts below reimaging thresholds in 19%/51% of fractions for SG‐SBRT/non‐SG‐SBRT cohorts. Differences in average number of CBCTs acquired were not statistically significant. The reference surface study found no statistically significant differences between the use of DICOM or VRT surfaces.ConclusionsSG‐SBRT improved pre‐imaging treatment setup compared to in‐room laser localization alone. It decreased the necessity of orthogonal kV imaging prior to CBCT but did not affect the average number of CBCTs acquired for setup. The selection of reference surface did not have a significant impact on initial patient positioning.

Highlights

  • Optical surface imaging is an increasingly popular imaging modality used in radiotherapy for patient setup and monitoring

  • We investigated the differences between two patient setup workflows: the original procedure and the new one (SG‐ stereotactic body radiotherapy (SBRT))

  • This indicates that orthogonal kV imaging could have been excluded from over 80% of the surface image guidance (SG)‐SBRT fractions studied in this work without impacting the quality of the setup

Read more

Summary

Introduction

Optical surface imaging is an increasingly popular imaging modality used in radiotherapy for patient setup and monitoring. At the time of treatment, the patient’s surface in the room is read by an optical system and automatically registered to the reference surface to calculate the deviation between the real‐time and expected treatment positions using six degrees of freedom (6DOF). This information can be used to evaluate and readjust the patient’s setup from within the room without the use of ionizing radiation. Radiographic imaging for image guided radiotherapy (IGRT) is still performed to ensure the precision of treatment delivery based on internal anatomy.[2]

Methods
Findings
Discussion
Conclusion
Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call