Impact of oxygen transport properties on the kinetic modeling of polypropylene thermal oxidation. II. Effect of oxygen diffusivity

Abstract

ABSTRACTThe kinetic model, established in a previous article (François‐Heude et al., J. Appl. Polym. Sci., in press) to predict the homogeneous oxidation in iPP films typically thinner than 100 µm, is now extended to simulate the oxidation profiles in thicker plates by coupling the oxygen diffusion and its consumption by the chemical reactions. In this perspective, oxygen transport properties (namely oxygen solubility, diffusivity, and permeability) are measured by permeametry on a reference iPP. These values are compared with an exhaustive compilation of literature data to evaluate their variability among the whole iPP family, which one has been reasonably ascribed to initial differences in polymer morphology, but also to evaluate their consistency, especially their temperature dependence between 20 and 140°C. Failing to simulate oxidation profiles, the kinetic model is then used as an inverse resolution method for estimating more satisfactory values of oxygen transport properties. It is thus evidenced that the crystallinity changes induced by thermal oxidation largely explains the dramatic decrease in oxygen penetration toward the sample core just after the induction period. A strategy aimed for introducing the relationship between the polymer crystalline morphology and oxygen transport properties into the kinetic model is given in the graphical abstract, although the effect of polymer polarity remains to be established prior to this implementation. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci.2015,132, 41562.