Impact of Mn addition on catalytic performance of Cu/SiBEA materials in total oxidation of aromatic volatile organic compounds

Abstract

Dealuminated BEA zeolite (SiBEA) was chosen as a support of metal oxide(s) phase for catalytic combustion of volatile organic compounds (VOCs). Copper and/or manganese oxide(s) were deposited at various Cu/Mn molar ratios. Factors influencing the catalytic activity were found by chosen physicochemical methods, including XRD, XRF, low-temperature N2 adsorption, FT-IR, UV–Vis-DRS, STEM-EDX, XPS and H2-TPR. Depending on the chemical composition, CuO, (CuxMn3-x)1-δO4, Cu-doped Mn3O4 or Mn2O3 was formed as the dominant phase. The active phase particles were located mainly in the interparticle voids of the zeolite support. SiBEA gained Lewis acid sites after the introduction of the metal oxide phase, especially in the case of CuO deposition. The presence of copper in the catalytic system resulted in enhanced reducibility of the active phase, and in a consequence in high catalytic activity in the total oxidation of aromatic VOCs, which proceeds according to the Mars-van Krevelen mechanism. After the introduction of Mn, the co-existence of different valence forms was found due to the redox equilibrium: Cu2+ + Mn3+ = Cu+ + Mn4+. Definitely, the addition of Mn to Cu/SiBEA increased the number of available surface vacancies and had a beneficial effect on the catalytic performance.