Impact of Local Groundwater Flow Model Errors on Transport and a Practical Solution for the Issue.

Abstract

A groundwater flow model is typically used to provide the flow field for conducting groundwater solute transport simulations. The advection term of the mass conserved formulation for groundwater transport assumes that the flow field is perfectly balanced and that all water flowing into a numerical grid cell is exactly balanced by outflows after accounting for sources/sinks or internal storage. However, in many complicated regional or site-scale models, there may be localized flow balance errors that may be difficult to eliminate through tighter flow convergence tolerances due to simulation time constraints or numerical limits on convergence tolerances. Thus, if water is erroneously gained or lost within a grid cell during the flow computation, the solutes within it will also be numerically affected in the associated transport simulation. Transport solutions neglect this error in groundwater flow as the transport equations that are solved assume no error in flow. This flow imbalance error can however have consequences on the transport solution ranging from unnoticeable errors in the resulting concentrations to spurious oscillations that can grow in time and hinder further solution. An approach has been suggested here, to explicitly handle these flow imbalances during mass conserved advective transport computations and report them in the corresponding transport mass balance output, as corrections that are needed to handle errors originating in the flow solution. Example problems are provided to explain the concepts and demonstrate the impacts.