Abstract
The Ultra Compact Combustor is a design that integrates a turbine vane into the combustor flow path. Because of the high fuel-to-air ratio and short combustor flow path, a significant potential exists for unburned fuel to enter the turbine. Using contemporary turbine cooling vane designs, the injection of oxygen-rich turbine cooling air into a combustor flow containing unburned fuel could result in heat release in the turbine and a large decrease in cooling effectiveness. The current study explores the interaction of cooling flow from typical cooling holes with the exhaust of a fuel-rich well-stirred-reactor operating at high temperatures over a flat plate. Surface temperatures, heat flux, and heat transfer coefficients are calculated for a variety of reactor fuel-to-air ratios, cooling hole geometries, and blowing ratios. Results demonstrate that reactions in the turbine cooling film can result in increased heat transfer to the surface. The amount of this increase depends on hole geometry and blowing ratio and fuel content of the combustor flow. Failure to design for this effect could result in augmented heat transfer caused by the cooling scheme, and turbine life could be degraded substantially.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have