Impact of graphene oxide nanoparticles and carbon black on the gamma radiation sensitization of acrylonitrile–butadiene rubber seal materials

Abstract

AbstractSeals prepared from acrylonitrile–butadiene rubber (NBR) are primarily used in nuclear services. Nevertheless, at relatively high ionizing radiation doses, NBR seal materials may undergo radiation‐induced degradation processes, leading to adverse effects on the sealing ability life. Herein, to strengthen the functional characteristics of NBR seals against radiation, graphene oxide (GO) nanoparticles were prepared and characterized by transmission electron microscopy, X‐ray diffraction (XRD), Fourier transform infrared (FTIR), and ultraviolet/visible spectroscopies. Various NBR/GO composites fabricated with different ratios of GO nanoparticles and in the presence or absence of carbon black (CB) were investigated via cross‐linking density, scanning electron microscopy, XRD, FTIR, and mechanical and thermal stability analyses. The synergistic effect of the simultaneous presence of GO and CB on the NBR seal sensitization to gamma radiation up to a dose of 1 MGy was studied. The physicomechanical properties were enhanced by adding GO nanosheets up to 3 phr and by incorporating 35 phr of a CB with GO until 5 phr. Further, the application of γ‐irradiation resulted in an overall enhancement in the mechanical, physical, and thermal stability of the prepared composites up to 0.5 and 1 MGy with GO nanosheets in the absence or presence of CB particles, respectively. The mechanical measurements indicated significant increments by loading with GO nanosheets in the absence and presence of CB as well as by irradiation. The tensile strength elevated up to about 121%, 336%, and 366% by adding 3 phr GO, 3 GO:35 CB phr, and 5 GO:35 CB phr, respectively.