Abstract
ABSTRACT Composite structures are sensitive to impact damage in practical engineering. Electric resistance change method (ERCM) is an ideal technique for damage monitoring of composite structures. Due to the anisotropy of fiber-resin matrix composites, impact location monitoring is difficult, and research on impact location of fiber composite laminates (FRPs) is limited. A preparation method of MXene/CNT/CuNps thin film sensor is proposed. According to the modeling simulation and theoretical calculation, the resistance change characteristics of the thin film sensor are obtained, the relationship between the impact distance and the resistance change is established, and the sensor array is designed. A three-point localization algorithm and a weight function compensation localization algorithm are proposed, which can improve the imaging accuracy of the impact position. The impact point location was observed and analyzed using ultrasonic C-scan technology. The results show that the weight function compensation positioning algorithm can accurately locate the impact of the composite structure, and the error in the X direction is 7.1%, the error in the Y direction is 0.03%, which verifies the effectiveness of the method.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
