IMC Growth Mechanisms of SAC305 Lead-Free Solder on Different Surface Finishes and Their Effects on Solder Joint Reliability of FCBGA Packages

Abstract

Intermetallic compound (IMC) growth behavior of lead-free solder plays an important role in ball grid array (BGA) solder joint reliability for flip chip BGA (FCBGA) packaging applications. The growth mechanism of IMC is reported based on a diffusion model. Thermal treatment such as accelerated thermal cycling (ATC) and isothermal aging exposure also contribute to the growth rate and morphology of lead-free solder IMC. Among the lead-free solder alloys, Sn-3.0wt.%Ag-0.5wt.%Cu (SAC305) solder is a promising substitute for Sn-Pb because of its good mechanical properties and wettability with current surface finishes. After thermal exposure, BGA solder joint reliability is degraded due to IMC formation and growth. In this study, two different thermal treatments, ATC and isothermal aging, and two different pad surface finishes, solder on pad (SOP) and electroless Ni immersion gold (ENIG), are considered in terms of IMC growth rate and mechanical solder joint reliability. An SOP finished interface forms a thin ε-phase Cu3Sn layer and a scallop-like η-phase Cu6Sn5 layer. In contrast, the ENIG finished interface forms a thick (Cu,Ni)6Sn5 IMC layer and prevents overall IMC growth. Different surface finished test vehicles are evaluated in an ATC test in a 0°C to 100°C temperature range and the Ni diffusion layer shows a longer solder joint fatigue lifetime than the nondiffusion barrier interface based on the micro cross-section and dye penetration analysis results. In an isothermal aging test at 100°C and 150°C, the aging temperature and time are valid factors to decide mechanical shock reliability. Interfacial fractures are found in the 100°C aged test vehicle due to easier crack propagation at the interface between the thin Cu3Sn layer and the scallop-like Cu6Sn5 layer based on SEM microstructure analysis results. Finally, this investigation proposes how to improve solder joint reliability and prevent interfacial fracture for SAC305 lead-free application.