Abstract
Nanosecond Repetitively Pulsed Discharge (NRPD) is a promising ignition concept for introducing diesel-like process parameters for hard-to-ignite renewable fuels in Spark Ignition (SI) engines. Knowing whether an ignition event initiated by a series of nanosecond electrical discharges was successful or not gives the possibility of using this information for closed-loop ignition control. This paper presents a methodology for detecting successful ignition under NRPD ignition.After a nanosecond discharge, the heat loss from the particles (plasma-gas) between the electrodes and the surrounding gas is different if a robust flame kernel is established. If a flame kernel is present, the heat losses are lower, resulting in a lower local density of the gas between the electrodes. The breakdown voltage value of a nanosecond pulse is proportional to the local density. A control pulse is applied after the main ignition sequence to detect successful ignition. Lower breakdown voltages of the control pulse are present if a robust early flame kernel is present. The control pulse is applied before the pressure rises due to the presence of fast combustion, allowing ignition to be detected during the inflammation phase, thus allowing the possibility to place additional ignition events, if necessary.This technique was experimentally analyzed in a Constant Volume ignition Cell (CVC) and in a Rapid Compression Expansion Machine (RCEM). In the CVC at the ignitability limit, lower breakdown voltages of the control pulse are mostly measured when no pressure rise is measured. In the RCEM, the heat release rate is analyzed with a two-zone thermodynamic model, and the early flame kernel formation is monitored with Schlieren imaging. Some overlap exists in the control pulses' breakdown voltages for the ignition and quenching experiments; nevertheless, the Schlieren videos outline that the overlapping cases have a similar flame kernel formation, and the difference arises thereafter.
Published Version (
Free)
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
