Ideal performance assessment of non-recirculating anaerobic fluidized bed reactors treating low to high strength organic loads with low retention time

Abstract

This study investigated the ideal performance of non-recirculating Anaerobic Fluidized Bed Reactors (AnFBRs) for treating organic wastewater of varying strengths under low Hydraulic Retention Time (HRT). Four 4.58 L AnFBRs were used to treat synthetic wastewater with an Organic Loading Rate (OLR) ranging from 4.50 to 40.11 gCOD/L-d, and HRT between 1.1 and 4.4 hours. The AnFBRs achieved high removal efficiencies ranging from 83 % to 96 % at steady state, except during the organic shock load, which reduced removal performance to 12 %. Shortened HRT conditions led to a decreasing trend in reactor pH due to an incomplete anaerobic cycle. The modified Stover-Kincannon model estimated the maximum substrate utilization rate of AnFBR's to be 196.08 gCOD/L-d, with a correlation coefficient of 0.98. Under shortended HRT, microbial diversity analysis identified predominant non-filamentous bacterial families, such as Streptococcaceae and Veillonellaceae, which collaborate during biofilm development in anaerobic environments. It was suggested that the porous media provided secure attachment sites for the biomass growth and biofilm formation under shock load and high shear force conditions. While these results offer valuable insights, further studies are needed to confirm these findings and enhance the understanding of the use porous media in non-recirculating AnFBRs.