Hygrothermal performance of internally insulated masonry walls with embedded wooden beam heads: a field study on the impact of hydrophobisation

Abstract

Internal insulation remains often the only option to thermally upgrade massive masonry. Unfortunately, internal insulation can significantly change the wall’s hygrothermal performance, resulting in a higher risk on frost damage, wood rot of embedded beam heads, etc. The application of hydrophobisation is often put forward as a potential measure to avoid moisture problems, though more research on the impact of hydrophobisation is still required. Thereto, the current paper presents the results of a field study on the hygrothermal performance of internally insulated masonry with embedded wooden beam heads, exposed to wind-driven rain. Both a vapour open capillary active and a vapour tight insulation system are studied. Mainly the moisture conditions near the back of the wooden beam head are found to be influenced by hydrophobisation, which lowers the relative humidity. Closer to the masonry’s interior surface, the choice of the insulation system also influences the results. In case of a well-applied hydrophobisation, overall, the vapour tight system shows a better performance than the capillary active vapour open system. An exception to this is found for the first months after applying the hydrophobisation and the insulation system, where a longer drying period is needed in case of the vapour tight system.