Hydrogen management and overpressure protection of the containment for future boiling water reactors

Abstract

New design and evaluation method for hydrogen management of containment atmosphere have been developed for application in the future boiling water reactor (BWR). These are intended as a part of consideration of severe accidents in the course of design so as to assure a high level of confidence that a large release of radioactivity to the environment that may result in unacceptable social consequences can reasonably be avoided. Emphasis on hydrogen management and protection against overpressure failure is based on the insights from probabilistic safety assessments (PSAs) that late phase overpressure (and associated leakage) and molten corium concrete reaction (MCCI) need attention to ensure that containment remains intact, in case energetic challenges to the containment such as DCH (direct containment heating) or FCI (fuel coolant interactions) are practically eliminated by design or resolved from risk standpoint of view. The authors studied the use of palladium-coated tantalum for hydrogen removal from containment atmosphere in order to avoid pressurization of the containment with small free volume by non-condensable gas and steam. Its effectiveness for ABWR (advanced boiling water reactor) containment was evaluated using laboratory test data. Although further experimental studies are necessary to confirm its effectiveness in real accident conditions, the design is a promising option and one that could be backfitted upon necessity to existing plants for which pressure retaining capability cannot be altered. Also new evaluation method for flammability control under severe accident conditions was developed. This method employes a realistic assessment of the amount of oxygen and hydrogen gases generated by radiolytic decomposition of water under severe accident conditions and their subsequent transport from water to containment atmosphere.