Abstract
Fuel cell systems, such as those used in electric vehicles require lightweight hydrogen fuel storage. Polymer composites are candidate materials for storage vessels requiring high fracture resistance for high pressure cycling, as well as high thermal conductivity. Here, we investigate 4,4′-diglycidyloxybiphenyl (DGOBP) epoxy for such applications, and clarified the relationship between the hydrogen penetration properties and the ordered structure of the epoxy. We controlled the ordered structure of the DGOBP polymer by adjusting the curing temperature of a 4,4′-diaminodiphenyl methane (DDM) curing system. We obtained a series of cured DGOBP with DDM samples with crystallinity values of 19%, 27%, 32%, and 36%, corresponding to curing temperatures of 130, 120, 110, and 100 °C, respectively. The thermal conductivities of these samples were 0.26–0.31 Wm−1 K−1. Cured DGOBP showed hydrogen contents of 403–1271 ppm (25–75% smaller than that of conventional epoxies). Liquid crystalline epoxy polymers can be a candidate material for hydrogen storage systems requiring well-controlled hydrogen penetration properties.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.