Abstract

Pressurized circulating fluidized bed technology is a potentially promising development for clean coal technologies. The current work explores the hydrodynamics of a small-scale circulating fluidized bed at elevated operating pressures ranging from 0.10 to 0.25 MPa. The initial experiments were performed at atmospheric pressure with air and O2/CO2 environments as the fluidization gas to simulate the hydrodynamics in a circulating fluidized bed. A comparison between the effects of air and O2/CO2 mixtures on the hydrodynamics was outlined in this paper for particles of 160 ?m diameter. A small but distinct effect on axial void-age was observed due to the change in gas density in the dense zone of the bed at lower gas velocity, while only minimal differences were noticed at higher gas velocities. The hydrodynamic parameters such as pressure drop and axial voidage profile along the height were reported at two different bed inventories (0.5 and 0.75 kg) for three mean particle sizes of 160, 302, and 427 ?m and three superficial gas velocities. It was observed that the operating pressure had a significant effect on the hydrodynamic parameters of bed pressure drop and axial bed void-age profiles. The effect of solids loading resulted in an exponential change in pressure drop profile at atmospheric pressure as well as at elevated pressure. The experimental results on hydrodynamic parameters are in reasonable agreement with published observations in the literature.

Full Text
Published version (Free)

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call