Abstract
NiMo nanocatalysts supported on activated red mud with different zeolite beta contents were successfully prepared by impregnation technique. Their hydrocracking and hydrodesulfurization activities were evaluated with two different kinds of diesel feed (iso diesel and heavy diesel) in a fixed bed reactor at ambient pressure and 500 °C. Physico-chemical properties of synthesized samples were characterized using the methods of XRF, XRD, FESEM, BET, FTIR and NH3-TPD. The results indicated that zeolite incorporation resulted in a significant increase in specific surface area (BET result) and acidic strength (TPD result) of nanocatalysts. FESEM analysis confirmed that the particles size of zeolite-containing NiMo/ARM was less than 100 nm and the average size of particles was about 30 nm. Hydrocracking results illustrated that incorporation of zeolite beta improved cracking activity considerably. In addition, NiMo nanocatalyst containing 37.5 wt% of zeolite had the highest yields of desirable products (naphtha, kerosene and diesel) and the highest conversion. Moreover, the flash point and viscosity of the liquid product decreased notably the nanocatalysts with 37.5 wt% and 12.5 wt% of zeolite were able to remove approximately 96% and 72% of the sulfur content of iso diesel and heavy diesel, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
