Abstract
A surge tank effectively reduces water hammer but experiences water level oscillations during transient processes. A double chamber surge tank is used in high head plants with appreciable variations in reservoir water levels to limit the maximum amplitudes of oscillation by increasing the volume of the surge tank near the extremes of oscillation. Thus, the volume of the chambers and the design of an orifice are the most important factors for controlling the water level oscillations in a double chamber surge tank. Further, maximum/minimum water level in the surge tank and damping of surge waves have conflicting behaviors. Hence, a robust optimization method is required to find the optimum volume of chambers and the diameter of the orifice of the double chamber surge tank. In this paper, the maximum upsurge, the maximum downsurge, and the damping of surge waves are considered as the objective functions for optimization. The worst condition of upsurge and downsurge is determined through 1-D numerical simulation of the hydropower system by using method of characteristics (MOC). Moreover, the sensitivity of dimensions of a double chamber surge tank is studied to find their impact on objective functions; finally, the optimum dimensions of the double chamber surge tank are found using non-dominated sorting genetic algorithm II (NSGA-II) to control the water level oscillations in the surge tank under transient processes. The volume of the optimized double chamber surge tank is only 44.53% of the total volume of the simple surge tank, and it serves as an effective limiter of maximum amplitudes of oscillations. This study substantiates how an optimized double chamber surge tank can be used in high head plants with appreciable variations in reservoir water levels.
Highlights
Unsteady or transient states are inevitable in any pressurized pipeline
The objective functions related to hydraulic transient and the constraints related to the design standard are developed, and optimization is carried out using non-dominated sorting genetic algorithm II (NSGA-II) to find the optimum volume of chambers and the diameter of the orifice of the double chamber surge tank
For controlling the water level oscillations in the surge tank under transient processes, much attention should be given in the design stage and the operational stage of the hydropower system
Summary
Unsteady or transient states are inevitable in any pressurized pipeline. Pressure and flow change at any point in the pressurized pipeline causes a disturbance in the steady state of the system. One of the ways to design an economic surge tank and control the effects of hydraulic transients in the hydropower system. Researchers have extensively studied these decision variables to minimize the cost of surge tanks and to resolve the hydraulic transient problems in the systems. Researchers have studied double chamber surge tanks to resolve the hydraulic transient problems in the systems. The arrangement of the chambers, their geometry, their volume, and the design of an orifice are the most important factors for controlling water level oscillations in a double chamber surge tank. The objective functions related to hydraulic transient and the constraints related to the design standard are developed, and optimization is carried out using NSGA-II to find the optimum volume of chambers and the diameter of the orifice of the double chamber surge tank. The most favorable operation mode for safe and stable operation of the hydropower system is developed
Sign-in/Register to view highlights & summary Sign-in/Register to access full text options 
Free) 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a call
