Hybrid chipboard panels based on sugarcane bagasse, urea formaldehyde and melamine formaldehyde resin

Abstract

The expansion of Brazilian agricultural production was very important in the last decade. A number of waste residues were produced showing an enormous potential for industrial crops and products. Sugarcane bagasse is the most important one and it has been investigated for chipboard panel's preparation. In this sense, this work aims to develop, characterize and compare chipboard panels made with sugarcane bagasse with urea formaldehyde (UF) and melamine formaldehyde (MF) resins. Panels were obtained with a mixture of sugarcane bagasse and particles, like pine or eucalyptus, with and without paraffin in the formulation. Nine different types of panels have been made, all with 9% in resin mix, under a pressing cycle of 4.0MPacm2, and temperature of 160°C. Under physical tests, the panels complied with the American Standard CS 236-66 for trading chipboards of medium density and, in most cases the results obtained were lower than the ones raised in the literature. Under mechanical tests, that same standard was not complied with and, in most cases the results were close to or higher than those obtained in the literature.