7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
7-days of FREE Audio papers, translation & more with Prime
7-days of FREE Prime access
https://doi.org/10.34088/kojose.1279222
Copy DOIPublication Date: May 31, 2024 |
Transcranial magnetic stimulation (TMS) is a wearable neuromodulation technique. It is approved for several therapies for various neurological disorders, including major depressive disorder, traumatic brain injury, Parkinson’s disease, and post-traumatic stress disorder. This method became an alternative neuromodulation technique for such brain-related disorders. However, it has shown significant improvement in this alternative approach. Studies based on this technique have shown limited efficacy. They might be associated with current levels, poor coil locality, optimal coil size, and neuromodulator settings. It has been shown in this research that coil heating is related to higher levels of current. Thus, it is required to analyze the impact of the current levels on the induced magnetic distribution to define the optimal current range for the TMS coils. It is not feasible to investigate this research with experimental tests and analytic methods. Alternatively, using an advanced computational model of the coils and accounting for different human head anatomical layers, coil current capacity can be optimized based on finite element magnetic field distribution. This paper aims to investigate the impact of the coil current levels on the induced magnetic field distribution. The current capacity of the coils can be optimized based on the required magnetic field. In this way, the overheating may be reduced and may result in increased efficacy. As a proof-of-concept, a prototype coil and multi-layered geometrical human head models were generated using geometric shapes. The fundamental human head tissue layers were generated based on their average thickness. The model was simulated based on a finite element magnetic simulation using appropriate boundary conditions and neuromodulator settings. The various coil current levels were applied to analyze the outcome. The models were simulated, and the results were recorded based on these current levels. Results showed that there is a direct relation between applied current levels and induced magnetic flux density in the region of interest.
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.