Abstract

Chemical Mechanical Polishing (CMP) has been used in the manufacturing process for copper (Cu) damascene process. It is well known that dishing and erosion occur during CMP process, and they strongly depend on metal density and line width. The inherent thickness and topography variations become an increasing concern for today's designs running through advanced process nodes (sub 65nm). Excessive thickness and topography variations can have major impacts on chip yield and performance; as such they need to be accounted for during the design stage. In this paper, we will demonstrate an accurate physics based CMP model and its application for CMP-related hotspot detection. Model based checking capability is most useful to identify highly environment sensitive layouts that are prone to early process window limitation and hence failure. Model based checking as opposed to rule based checking can identify more accurately the weak points in a design and enable designers to provide improved layout for the areas with highest leverage for manufacturability improvement. Further, CMP modeling has the ability to provide information on interlevel effects such as copper puddling from underlying topography that cannot be captured in Design-for- Manufacturing (DfM) recommended rules. The model has been calibrated against the silicon produced with the 45nm process from Common Platform (IBMChartered- Samsung) technology. It is one of the earliest 45nm CMP models available today. We will show that the CMP-related hotspots can often occur around the spaces between analog macros and digital blocks in the SoC designs. With the help of the CMP model-based prediction, the design, the dummy fill or the placement of the blocks can be modified to improve planarity and eliminate CMP-related hotspots. The CMP model can be used to pass design recommendations to designers to improve chip yield and performance.

Talk to us

Join us for a 30 min session where you can share your feedback and ask us any queries you have

Schedule a call

Disclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.