Hot‐Pressed Hybrid Electrodes Comprising Silver Nanowires and Conductive Polymers for Mechanically Robust, All‐Doctor‐Bladed Semitransparent Organic Solar Cells

Abstract

AbstractFuture low‐cost, high‐throughput production of organic solar cells in roll‐to‐roll printing processes calls for all‐solution‐processable device architectures. Mechanical flexibility and robustness are mandatory to roll the solar foils during printing and to eventually comply with certain end‐user requirements. Here, we report on semitransparent organic solar cells, comprising top and bottom silver nanowire (AgNW) electrodes that were embedded into conductive poly(3,4‐ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). The devices exhibited excellent robustness in bending experiments with radii of 5 and 2.5 mm as well as upon folding. To avoid short circuits from nanowires that could stick out of the bottom electrodes, the PEDOT:PSS:AgNW layers were flattened by hot‐pressing after deposition. All solar cells were fabricated in air by doctor blading and exhibited a clear (haze‐free) transparency due to the absence of bus bars. On photoactive areas of 0.5 cm2, power conversion efficiencies of 3.8 % were obtained.