Abstract
Metal flow and microstructure evolution during the thermomechanical processing of thin-gage foil of a near-gamma titanium aluminide alloy, Ti–45.5Al–2Cr–2Nb, with an equiaxed-gamma microstructure was investigated experimentally and theoretically. Foils of thickness of 200–250 μm were fabricated via hot rolling of sheet in a can of proprietary design. The variation in gage of the rolled foils was ±15 μm except in very sporadic (local) areas, with variations of approximately 60 μm relative to the mean. Metallography revealed that the larger thickness variations were associated with large remnant colonies lying in a hard orientation for deformation. To rationalize these observations, a self-consistent model was used to estimate the strain partitioning between the softer (equiaxed-gamma) matrix and the remnant colonies. Furthermore, the efficacy of pre- or post-rolling heat treatment in eliminating remnant colonies was demonstrated and quantified using a static-spheroidization model. The elimination of remnant colonies via spheroidization prior to foil rolling gave rise to improved gage control.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
