Hot-pressed membrane assemblies enhancing the biofilm formation and nitrogen removal in a membrane-aerated biofilm reactor

Abstract

Membrane-aerated biofilm reactor (MABR) is gaining popularity in wastewater treatment as a result of the low-energy delivery of oxygen from the carrier side and reduced sludge waste production, although its wider application suffers from the difficulty in microbial colonization on the smooth, hydrophobic membrane surface. In this study, a newly designed membrane/non-woven fabric assembly, prepared via a facile hot-pressing method, is demonstrated to be efficient in promoting the biofilm formation and nitrogen removal in MABR. The assembly achieved rough surface structure to retain biomass whilst sustained the surface hydrophobicity for a high oxygen transfer ability, which is crucial to support a resilient biofilm. Compared with the slower biomass growth and severe detachment of biofilm in the control, a thicker biofilm was quickly developed on the hot-pressed membrane assembly. High loading rates of organic matter, ammonia nitrogen and total nitrogen (TN) in the MABR using the hot-pressed membrane were 154.9 ± 5.4 g COD/(m2·d), 25.5 ± 0.6 g N/(m2·d) and 22.6 ± 0.7 g N/(m2·d), respectively. Particularly, the removal efficiency of TN was up to 82.8%, which was 2.5 times higher than the control. Furthermore, the biofilm grown on the hot-pressed membrane assembly organized a stable microbial community structure with a steady evolution to achieve a synergistic denitrifying function. Among the bacterial phylotypes, OLB8 might be crucial in denitrification. This study highlighted the significance of this facile membrane modification method to improve the process performance of MABR in wastewater treatment.