Abstract
Hot compression analysis of Magnesium/Boron nitride nanocomposites were investigated with the help of UTM attached with Furnace having a capacity of 100 KN. The tests were conducted from 0.001-1 s–1 strain rate and 200–450°C temperature with an interval of 50°C. The Dynamic Material Model (DMM) is used to obtain the flow curves and processing maps and optimum hot-working conditions. The optical and scanning electron microscopes are used to analyse the microstructure of the materials. The results illustrated in relation to the material damage and structural change of the s amples are varied according to the environments. It was demonstrated that the correct microstructure is also associated with the microstructure observed.
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have